(+39) 049 8955008
ore 10:30-12:30 e 15:30-18
info@steelmodels.com

Il tuo carrello

Il tuo carrello è vuoto

Prodotti: 0
Totale prodotti: € 0,00

Vai al carrello

EDUARD: 1/72; ProfiPACK edition kit of the German WWII fighter plane Bf 109G-2

Prezzo: 17,95 Iva inclusa (22%)
Quantità:

Vuoi essere avvisato quando sarà disponibile?

Vuoi riceverlo per primo?

Spedito entro 48 ore
Spedito entro: da definire

Prodotto aggiunto al carrello.

Vai al carrello

Quantità massima acquistabile per il prodotto raggiunta

Vai al carrello

Marca: EDUARD

Cod. art.: EDU70156
EAN 8591437586851

Scala: SCALA 1:72
Materiale: plastica
Disponibilità: Non disponibile
Spedizione: Verifica costo

Dicono di noi
Aggiungi alla wishlist
Rimuovi dalla wishlist
Verifica il costo di spedizione
Richiedi informazioni
SPEDIZIONE GRATIS
IN ITALIA
SCONTO IMMEDIATO
su TUTTI gli ORDINI
PAGAMENTI IN
3 RATE PAYPAL
EDUARD: 1/48; ProfiPACK edition kit of German WWII liasion aircraft Bf 108 New

EDUARD: 1/48; ProfiPACK edition kit of German WWII liasion aircraft Bf 108

Marca: EDUARD
Cod. art.: EDU8078
Scala: SCALA 1:48
Materiale: plastica
Dispon.: Disponibile

Prezzo: € 32,95

 ()
Aggiungi al carrello

Prodotto aggiunto al carrello.

Vai al carrello

Prodotto aggiunto al carrello.

Vai al carrello

Quantità massima acquistabile per il prodotto raggiunta

Vai al carrello
EDUARD: 1/48; ProfiPACK edition kit of German WWII fighter aircraft Bf 109G-10

EDUARD: 1/48; ProfiPACK edition kit of German WWII fighter aircraft Bf 109G-10

Marca: EDUARD
Cod. art.: EDU82161
Scala: SCALA 1:48
Materiale: plastica
Dispon.: Disponibile

Prezzo: € 39,95

 ()
Aggiungi al carrello

Prodotto aggiunto al carrello.

Vai al carrello

Prodotto aggiunto al carrello.

Vai al carrello

Quantità massima acquistabile per il prodotto raggiunta

Vai al carrello
SPECIAL HOBBY: 1/72; Blohm & Voss BV 155V-1

prodotto da assemblare e da dipingere. Colori e colla non forniti.The Blohm Voss BV 155B was supposed to become the very weapon to stop the new American B-29 high altitude bombers. However, these magnificent machines were sent to the Pacific area instead and the development of the BV 155B was not brought to a successful finish. The development had really been rather complicated, originally taking place at Messerschmitt facility under designation the Me 155, originally intended to be a naval fighter for the planned but never finished Graf Zeppelin carrier. As the requirements of the RLM changed with time, the type was also redesigned to perform as a high altitude machine, the Me155B. The Messerschmitt development team was overburden with several other projects, so the RLM decided to transfer the project work to Blohm Voss, where, however, the Blohm Voss' chief designer Richard Voght considered the project to be quite bad and eventually redesigned it completely. The type's designation changed as well to the BV155, and the new plane was much larger with a long span wing. A four-bladed propeller was driven by a turbo-charged DB 603U engine, with engine radiators hung under the wing. The first BV155V-1 made its maiden flight on 1 September 1944, equipped with a pressurized cockpit and a Rb 50/30 camera behind the pilot's seat. The planned armament was to consist of a 30 mm MK108 cannon in the propeller shaft and two 20mm MG151/20 cannon in the wings. Several problems occurred during the first flights, although the team was able to tackle some of them eventually. Another two prototypes, the V- 2 and V-3 had were also partially built. Richard Voght considered also the BV155C, a version which was to have its radiator in the forward fuselage. However, the advancing British troops brought an end to all these plans when they seized the Blohm Voss factory and also Hamburg-Finkerwerder airfield. The RAF supposedly test-flown the BV155, or at least an inventory number was assigned to the type. At first, the Bv155 was sent to the UK, consequently over the pond to the USA. Nowadays, the already incomplete machine is stored at the National Air and Space Museum depository. The BV 155B V1 model kit set had already been in production before in so called short run form. It is long sold out now. This new release is a different model produced partly using steel tooling. It comes on three grey styrene sprues, one with clear parts and two detail resin cast items. - re-release of highly sought-after model- unusually-shaped airframe- no-one else produces the BV 155 in decent quality. Our earlier short run model was taken and copied by ART Model company, including the instruction sheet. Be aware of this bad quality thing

SPECIAL HOBBY: 1/72; Blohm & Voss BV 155V-1

Marca: SPECIAL HOBBY
Cod. art.: SH72340
Scala: SCALA 1:72
Materiale: plastica
Dispon.: Disponibile

Prezzo: € 18,95

prodotto da assemblare e da dipingere. Colori e colla non forniti.The Blohm Voss BV 155B was supposed to become the very weapon to stop the new American B-29 high altitude bombers. However, these magnificent machines were sent to the Pacific area instead and the development of the BV 155B was not brought to a successful finish. The development had really been rather complicated, originally taking place at Messerschmitt facility under designation the Me 155, originally intended to be a naval fighter for the planned but never finished Graf Zeppelin carrier. As the requirements of the RLM changed with time, the type was also redesigned to perform as a high altitude machine, the Me155B. The Messerschmitt development team was overburden with several other projects, so the RLM decided to transfer the project work to Blohm Voss, where, however, the Blohm Voss' chief designer Richard Voght considered the project to be quite bad and eventually redesigned it completely. The type's designation changed as well to the BV155, and the new plane was much larger with a long span wing. A four-bladed propeller was driven by a turbo-charged DB 603U engine, with engine radiators hung under the wing. The first BV155V-1 made its maiden flight on 1 September 1944, equipped with a pressurized cockpit and a Rb 50/30 camera behind the pilot's seat. The planned armament was to consist of a 30 mm MK108 cannon in the propeller shaft and two 20mm MG151/20 cannon in the wings. Several problems occurred during the first flights, although the team was able to tackle some of them eventually. Another two prototypes, the V- 2 and V-3 had were also partially built. Richard Voght considered also the BV155C, a version which was to have its radiator in the forward fuselage. However, the advancing British troops brought an end to all these plans when they seized the Blohm Voss factory and also Hamburg-Finkerwerder airfield. The RAF supposedly test-flown the BV155, or at least an inventory number was assigned to the type. At first, the Bv155 was sent to the UK, consequently over the pond to the USA. Nowadays, the already incomplete machine is stored at the National Air and Space Museum depository. The BV 155B V1 model kit set had already been in production before in so called short run form. It is long sold out now. This new release is a different model produced partly using steel tooling. It comes on three grey styrene sprues, one with clear parts and two detail resin cast items. - re-release of highly sought-after model- unusually-shaped airframe- no-one else produces the BV 155 in decent quality. Our earlier short run model was taken and copied by ART Model company, including the instruction sheet. Be aware of this bad quality thing

 ()
Aggiungi al carrello

Prodotto aggiunto al carrello.

Vai al carrello

Prodotto aggiunto al carrello.

Vai al carrello

Quantità massima acquistabile per il prodotto raggiunta

Vai al carrello
EDUARD: 1/48 ; F4U-1A - set di fotoincisioni per kit MAGIC FACTORY 5001 New

EDUARD: 1/48 ; F4U-1A - set di fotoincisioni per kit MAGIC FACTORY 5001

Marca: EDUARD
Cod. art.: EDUFE1429
Scala: SCALA 1:48
Dispon.: Disponibile

Prezzo: € 6,95

 ()
Aggiungi al carrello

Prodotto aggiunto al carrello.

Vai al carrello

Prodotto aggiunto al carrello.

Vai al carrello

Quantità massima acquistabile per il prodotto raggiunta

Vai al carrello
EDUARD: 1/48 F-35B seatbelts STEEL- set di fotoincisioni per kit TAMIYA 61125 New

EDUARD: 1/48 F-35B seatbelts STEEL- set di fotoincisioni per kit TAMIYA 61125

Marca: EDUARD
Cod. art.: EDUFE1421
Scala: SCALA 1:48
Dispon.: Disponibile

Prezzo: € 6,95

 ()
Aggiungi al carrello

Prodotto aggiunto al carrello.

Vai al carrello

Prodotto aggiunto al carrello.

Vai al carrello

Quantità massima acquistabile per il prodotto raggiunta

Vai al carrello
EDUARD: 1/48 ; F4U-1A - set di fotoincisioni per kit MAGIC FACTORY 5001 New

EDUARD: 1/48 ; F4U-1A - set di fotoincisioni per kit MAGIC FACTORY 5001

Marca: EDUARD
Cod. art.: EDU491427
Scala: SCALA 1:48
Dispon.: Disponibile

Prezzo: € 19,95

 ()
Aggiungi al carrello

Prodotto aggiunto al carrello.

Vai al carrello

Prodotto aggiunto al carrello.

Vai al carrello

Quantità massima acquistabile per il prodotto raggiunta

Vai al carrello
EDUARD: 1/48 ; Gannet AS.4- set di fotoincisioni per kit AIRFIX 11007 New

EDUARD: 1/48 ; Gannet AS.4- set di fotoincisioni per kit AIRFIX 11007

Marca: EDUARD
Cod. art.: EDU491425
Scala: SCALA 1:48
Dispon.: Disponibile

Prezzo: € 21,50

 ()
Aggiungi al carrello

Prodotto aggiunto al carrello.

Vai al carrello

Prodotto aggiunto al carrello.

Vai al carrello

Quantità massima acquistabile per il prodotto raggiunta

Vai al carrello
EDUARD: 1/48 ; Gannet AS.1- set di fotoincisioni per kit AIRFIX 11007 New

EDUARD: 1/48 ; Gannet AS.1- set di fotoincisioni per kit AIRFIX 11007

Marca: EDUARD
Cod. art.: EDU491424
Scala: SCALA 1:48
Dispon.: Disponibile

Prezzo: € 21,50

 ()
Aggiungi al carrello

Prodotto aggiunto al carrello.

Vai al carrello

Prodotto aggiunto al carrello.

Vai al carrello

Quantità massima acquistabile per il prodotto raggiunta

Vai al carrello
EDUARD: 1/48 ; F-35B - set di fotoincisioni per kit TAMIYA 61125 New

EDUARD: 1/48 ; F-35B - set di fotoincisioni per kit TAMIYA 61125

Marca: EDUARD
Cod. art.: EDU491420
Scala: SCALA 1:48
Dispon.: Disponibile

Prezzo: € 32,50

 ()
Aggiungi al carrello

Prodotto aggiunto al carrello.

Vai al carrello

Prodotto aggiunto al carrello.

Vai al carrello

Quantità massima acquistabile per il prodotto raggiunta

Vai al carrello
EDUARD: 1/48 ; Gannet AS.1/AS.4 TFace - mascherina doppia per verniciatura kit AIRFIX 11007 New

EDUARD: 1/48 ; Gannet AS.1/AS.4 TFace - mascherina doppia per verniciatura kit AIRFIX 11007

Marca: EDUARD
Cod. art.: EDUEX1017
Scala: SCALA 1:48
Dispon.: Disponibile

Prezzo: € 13,00

 ()
Aggiungi al carrello

Prodotto aggiunto al carrello.

Vai al carrello

Prodotto aggiunto al carrello.

Vai al carrello

Quantità massima acquistabile per il prodotto raggiunta

Vai al carrello
EDUARD: 1/48 ; F-35B TFace - mascherina doppia per verniciatura kit TAMIYA 61125 New

EDUARD: 1/48 ; F-35B TFace - mascherina doppia per verniciatura kit TAMIYA 61125

Marca: EDUARD
Cod. art.: EDUEX1012
Scala: SCALA 1:48
Dispon.: Disponibile

Prezzo: € 11,50

 ()
Aggiungi al carrello

Prodotto aggiunto al carrello.

Vai al carrello

Prodotto aggiunto al carrello.

Vai al carrello

Quantità massima acquistabile per il prodotto raggiunta

Vai al carrello
EDUARD: 1/48; FREEDOM TIGER- Limited edition of the kit of the US supersonic light fighter F-5E New

EDUARD: 1/48; FREEDOM TIGER- Limited edition of the kit of the US supersonic light fighter F-5E

Marca: EDUARD
Cod. art.: EDU11182
Scala: SCALA 1:48
Materiale: plastica
Dispon.: Disponibile

Prezzo: € 66,95

 ()
Aggiungi al carrello

Prodotto aggiunto al carrello.

Vai al carrello

Prodotto aggiunto al carrello.

Vai al carrello

Quantità massima acquistabile per il prodotto raggiunta

Vai al carrello